Large
5/8 inch diameter molded nylon
supply tube with large mounting brackets
and clear flexible supply line. Large
threads don't strip or cross thread.
Pump
flow is matched to nozzles
to prevent over pumping beverage.
Easy twist on-off pump housing for cleaning.
No little nuts or screws to mess with.
Large inlets to accept and pump pulp.
Pump motor is air cooled and mounted in
the base, away from the beverage.
Two
moisture tight light caps and
sockets with pole O-ring sealed at bowl end with a machined
stainless steel flange.
Maintenance Hint... Coat light bulb threads lightly
with Vaseline to prevent corrosion.
|